The BEng Honours programme in Electrical and Electronic Engineering is directly awarded by the University of Hertfordshire, England. The University of Hertfordshire has a history of providing the electronics industry with highly professional, practical graduates.
Modern electrical and electronic engineering has rapidly evolved into many diverse areas. Mobile telephones, satellites communications, computers, automobile engine management systems and heart pacemakers are all examples of modern electronics. The generation and distribution of electrical power, the control of traction systems in high speed trains, electronic vehicles and urban transport systems, all require electrical and electronic engineering. Today’s diverse communications (from traditional radio through to satellite and internet systems) place ever-increasing demands on electronic systems to carry information.
All of these areas demand highly skilled electrical and electronic engineers and technicians for equipment design, manufacture, commissioning and maintenance. University of Hertfordshire degree provides you with an educational experience which matches these requirements, whilst responding to your own individual aspirations.
This final year top-up degree programme consists of 6 modules and one project and the complete programme consists of 120 credit points.It is conducted over 2 semesters of about 6 months each.
BENG(HONS) ELECTRICAL AND ELECTRONIC ENGINEERING – LEVEL 6(FINAL YEAR)\
|MODULE TITLE||CREDIT POINTS||% EXAMINATION||% COURSEWORK|
|Microelectronics & VLSI||15||60||40|
|Sem A & B|
|BEng final year project||30||0||100|
|Digital Signal Processing||15||60||40|
|Intelligent Systems and Robotics||15||60||40|
|Advanced Power Conversion & Control||15||60||40|
- Relevant Diploma from local polytechnics in Singapore or equivalent national qualifications (or)
- BTEC level 5 HND Diploma in Electrical and Electronic Engineering (or)
- Mature candidates (30 years old with 8 years of working experience) with relevant Diploma from other Private education institutes or equivalent qualifications.
Language Proficiency: Students entering the programme whose first language is not English or students whose medium of instruction on their qualifying programme was not English will be required to demonstrate a proficiency in English to TOEFL 550/IELTS 6.0 or an equivalent qualification
Study of modern power generation, control and distribution systems to include power system design, evaluation of stability and fault tolerance using appropriate software simulation tools and analysis of power flow control in transmission systems.
Microelectronics and VLSI
Develops design techniques further into the area of integrated circuit design, focussing particularly upon the demands of high-speed analogue and digital IC technologies. The analytical design process is supported by the use of relevant software design and simulation tools.
Expands and develops your knowledge of communication techniques to include digital and multi-user modulation strategies, channel coding and equalisation techniques. Learning is supported by practical analysis of typical systems.
Digital Signal Processing
Architecture and use of advanced dedicated processors for the manipulation of digital data. Software simulation is used for the evaluation of designs.
Intelligent Systems and Robotics
Extends existing knowledge of control systems to include the design and evaluation of fuzzy logic and neutral network-based systems, taught in the context of robotics.
Advanced Power Conversion and Control
Further develops understanding of analogue and digital electronics in the context of power control, particularly of rotating machines to include both practical and simulated design and analysis of intelligent power controlsystems.
BEng Final Year Project
An opportunity for you to demonstrate your abilities as an electronics engineer as you undertake a substantial individual project in your specialist subject area.
Full/part time : 12 months.
Note: This course is conducted only at Jurong East. Please call 6565 5655 for more information.
Assessment and Grading System
Each module(except project module) is assessed for 100%, which comprise of course work(40%) and final exam(60%). The course work comprises of laboratory assessment and phase tests. Final year project module is 100% assessed on course work comprises feasibility report, interim seminar, demo & poster presentation and report.
The pass mark for each module is 40%. Both course work and final exam must be passed separately.
The degree classification is calculated based on the average of best 90 credit modules in which project module is compulsory.
- First class Honours: 70% to 100%
- Upper second class Honours: 60% to 69%
- Lower second class Honours: 50% to 59%
- Third class Honours: 40% to 49%
|$17,748.25 (FULL PAYMENT)||S$17,748.25 (FULL PAYMENT)||$18,656.04 (FULL PAYMENT)|
|S$18018.43 (2 INSTALLMENT)|
|$18018.43 (12 INSTALLMENT)|
- All fees are subject to the prevailing Goods and Services Tax (GST) unless specified otherwise.
- Course Application Fee is NOT REFUNDABLE.
- Do not pay your school fees before you have signed the standard student contract.
- All fees quoted are in Singapore Dollar (S$).
- Fees are subject to periodic changes without prior notice.
- BMC accepts the following methods of payment:
- Cashier’s order payable to BMC International College Pte Ltd
- Cheque payable to BMC International College Pte Ltd
- PAYNOW (UEN 200006772H)
- Credit cards (VISA & Mastercard)
COURSE DURATION TABLE:
|12 months||12 months|
BMC International College’s customer service executives are here to assist you by providing you with all the necessary information you would need to register for any of our courses.
Drop us an inquiry now and one of our customer service executives will get back to you as soon as we can. Looking forward to hearing from you!
By clicking send applicants agree to provide the above personal information to BMC International College, as such applicants consent to the collection and use of personal data by BMC International College for purposes related to course enquiries.